User Manual

14
USING THE POP-UP SHADE
The pop-up shade is pre-installed
on the Receiver/Viewer. To open
it, place your thumb under the
narrower tab and lift the cover.
The side panels will pop open. To
close the shade, push in both side
panels and snap down the cover.
To remove the shade, lift the
bottom-most (wider) tab
o the device. The entire
shade will come o.
Brightness
Though the pop-up sun shade will
help you see the screen in bright
daylight, you can set the brightness
to one of five levels. Toggle
through the Menu button and
select Brightness. Press the Set
button to adjust the brightness.
A slider bar appears. Each level
increases the brightness by 20%.
Contrast
Toggle through the Menu
button until Contrast is
selected. A slider bar appears.
Press the Set button to
adjust the contrast. Each level
increases contrast by 20%.
SCREEN ADJUSTMENTS
To attach the shade, align the
tab at the top of the shade with
the slot above the screen. Then
press down on the bottom of
the shade until the unit snaps
into the slot below the screen.