User Manual

20
Single Shots
1. Set your camera to Single shot
mode.
2. Press the Menu button on
the Receiver/Viewer followed by
the Set button to navigate
to the single shot icon [ ].
3. Half press the shutter button
on the Receiver/Viewer to
activate focusing. A green LED
will light up near the upper right
corner of the LCD.
4. Fully press the shutter button
to take the shot. The shutter
LED will turn red.
Continuous Shots
1. Set your camera to Continuous
drive mode.
2. Press the Menu button on
the Receiver/Viewer to get to
Drive mode.
3. Press the Set button
to highlight the continuous
shooting mode icon [ ] as seen
on the Receiver/Viewer screen.
DRIVE MODES
4. Half press the shutter button
on the Receiver/Viewer to
activate focusing. A green LED
will light up near the upper right
corner of the LCD.
5. Fully press the shutter button.
The shutter LED will turn red.
Note: with some cameras you’ll have to first manually focus the camera
and then use the receiver to remotely trigger the shutter.