User Manual

24
If you want to capture the same
subject from dierent angles or
dierent subjects within range
of one Receiver/Viewer, you can
operate up to four cameras from
one Receiver/Viewer. Multiple
camera control is compatible
with stills or video as long as
you switch drive modes on
the FreeWave Viewer VL.
Follow these steps to set each
Transmitter/Mini-Cam to
one of the four channels.
MULTIPLE CAMERA CONTROL
1. Press the Menu button four
times to display the Channel
menu at the bottom the screen.
2. Using the Set button, cycle
through the four channels for
each of the Transmitter/Mini-
Cams you’ll be using.
3. To select the highlighted
channel, fully press the Shutter
button at the top of the
Receiver/Viewer. The shutter
indicator light will flicker.
Quickly press the match button
on the Transmitter/Mini-Cam
while the indicator light is
flickering on the Receiver/
Viewer.
4. The signal light of the
Transmitter/Mini-Cam will
start to flicker. When it stops,
it should have successfully
matched with the Receiver/
Viewer.
5. Repeat this procedure for up
to three additional Transmitter/
Mini-Cams, choosing a dierent
channel for each.