Owner`s manual

10
STEP 10. Arrange the white stones (WS) and clear faux stones (CS) along the inset window ledge
at the front of the firebox. Use care when moving the fireplace as the stones may shift positions.
The next step requires installation of a GLASS panel!
The manufacturer recommends
that two adults install the glass panel. Always use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
STEP 11. Set both hooks of the front glass panel (B) into the slots at the top front edge of the
firebox (A). Press the two posts of the glass panel into the locking slots near the lower corners of
the front firebox panel. Thread the M4x8 machine screws (2) through the hooks and into the
threaded holes in the firebox. Check the glass panel alignment and securely tighten the screws with
a Phillips screwdriver.
A
B
2
A
B
Post
WS/CS
Slot
Hook
Meijer.com