Owner`s manual

12
Control Panel Operation (Each symbol means Press Button Once)
BUTTON FUNCTION
PRESS
and INDICATION
ON/OFF
The ON/OFF switch must be ON for the
flame and heater functions to operate.
The ON/OFF switch must be ON to use the
REMOTE CONTROL.
1. Beep. ON. Flame effect, heaters,
lights, and fans remain OFF.
2. During operation, when switched
from ON to OFF, all functions will turn OFF.
FLAME
The FLAME button controls the flame effect
(lights and blower) and backlight effects.
On the REMOTE CONTROL, these effects
are controlled separately.
The FLAME button also enables the heater.
The heater will only work if the flame effect
is ON.
1. Beep. Flame intensity - High. Heater
is now enabled.
2. Beep. Flame intensity - Medium.
3. Beep. Flame intensity - Low.
4. Beep. Flame effect - Multicolor.
5. 6. 7. Beeps. Cycles through
backlight effects with flame effect on.
HEATER
The HEATER button controls the left and
right heaters. There are four levels: Low
(Left), Low (Right), High (Both), and Off.
The heater only works when the flame
effects are ON. If the flame effects are OFF,
the heater will not turn on.
To prevent overheating, the heater fan will
blow cool air for 8-10 seconds each time
the heater is turned ON or OFF.
1. Beep. Left heater & fan turn ON; left
pilot light glows ☼●, then turns off.
2. Beep. Right heater & fan turn ON;
right pilot light glows ●☼, then turns off.
Left heater and left pilot light turn OFF.
3. Beep. Both heaters & fans turn ON;
both pilot lights glow ☼☼, then turn off.
4. Beep. Both heaters turn OFF, both
pilot lights turn off ●●.
Control
Panel
Flame
Effect
LED
Backlights
Pilot
Lights
Hot Air
Vents
Meijer.com