Owner`s manual

4
PREPARATION
This carton includes a GLASS panel! Always use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface.
Check to make sure nothing is missing. Dispose of packaging materials properly. Please recycle.
Tools (not included): Phillips screwdriver; stud finder; level; tape measure; electric drill; 1/16” drill bit.
Concrete walls: DO NOT use these anchors. Consult a professional for proper anchoring methods.
PARTS & HARDWARE
A – Firebox ( 1 ) B – Front Glass Panel ( 1 )
NOTE: The wall mount bracket (C) is attached to the
back of the firebox (A) by two thumb screws (6).
C – Wall Mount Bracket ( 1 ) 6 – M5x8 Machine Screws ( 2 )
NOTE: Unscrew both M5x8 machine screws (6) from the top of the firebox (A). KEEP the machine screws.
Remove the wall mount bracket (C) from the firebox.
A
6
6
C
Meijer.com