Owner`s manual

Page 6.5
Override Button Operation
Press
OVERRIDE
Unoccupied
7:56
We
Pm
HEAT
COOL
Program On
65
55
85
Override
occupied
30
Pm
HEAT
COOL
Program On
65
72
74
7:56
:
We
6
Unoccupied Operation - During programmed, unoccupied periods,
pressing the OVERRIDE button will temporarily force the thermostat
into Occupied comfort settings for the number of hours programmed in
step #43 on page 18.1. The remaining override time will alternate with
the clock (refer to the second display below). Pressing the
OVERRIDE button again will cancel the timer, returning the thermostat
Occupied Operation - To turn off the equipment due to abnormal
conditions during school hours, press and hold the OVERRIDE button
for five seconds. The equipment will shut off and the heating and
cooling setpoints will show ‘OF’. If the OVERRIDE button is pressed
again, the thermostat will return to Time Schedule comfort settings
until the end of the Occupied period.
The OVERRIDE button may be used to interrupt the normal time
schedule programming of the thermostat. Override may only be
used when the thermostat is running the time schedule, in Program
On mode.
During school hours pressing the OVERRIDE button will force the
thermostat into the Time Schedule comfort settings until the end of
the Occupied period. During this Occupied period, the setpoints may
be adjusted; however, the adjusted setpoints will not be remembered
for the following school day. After this time, the thermostat will bring
in energy saving unoccupied setpoints.
Normal Operation
Override Operation
to the correct time period program for the day.