Owner`s manual

Page 18.1

How to Use the Override Timer

During programmed, unoccupied periods, pressing the OVERRIDE

button will temporarily force the thermostat into Occupied comfort

settings for the number of hours programmed in step #43, below.

For example, if the thermostat is programmed to be occupied from

8:00 AM to 5:00 PM, but a cleaning crew is scheduled to come into

the building from 7:00 PM to 9:00 PM, then this setup step can be

programmed for two hours. When the cleaning crew presses the

OVERRIDE button at 7:00 PM, the thermostat will stay in the

Occupied mode until 9:00 PM.

SECTION 18

Override Timer Operation

Press the PROGRAM button to leave the Setup screens. If no buttons are

pressed, the display will leave the setup screens after 30 seconds.

PROGRAM

Press

Adjust the amount

of time override will

be active during the

unoccupied time

period.

PROGRAM

MODE

Press the MODE button. While holding

the MODE, press the PROGRAM

button to enter Setup screens.

Press the MODE button repeatedly

until this setup screen appears.

Note: Press the MODE

button momentarily

to move through the

setup screens. Press

and hold the MODE

button to move back-

wards through the

setup screens.

Override

Setup

(0 - 6 hours)