Operation Manual

11
Before first use
Illustration 1
Remove upper housing. Remove transport protection from the upper housing. Remove disk stack.
Remove transport protection from the lower housing. Remove trial package (LW 24 Plus/44 Plus:
from lower housing).
Putting into operation
• Place the air washer on a dry and level surface at least 50 cm from the walls, furniture and any
other objects.
• Check whether switching power supply or cable are free from damage.
• The Airwasher LW 24 Plus/44 Plus is not intended for use with a humidity regulator or a timer.
Illustration 2
Remove upper housing. Fill water into the lower housing. The appliance may never be filled with
the upper part in place! Filling level: See marker in the lower housing (approx. 5 cm below the
trough rim). Add entire content of the Venta hygiene agent (sample bottle 50 ml). Insert disk stack
again.
Illustration 3
Replace the upper housing. Plug the appliance into the mains. Switch on the appliance with button
 and operation display  lights up. Select required fan stage to 1/2/3 with selector button .
Operator panel
 ON / OFF button
 Operation indication ON / OFF
Continuous lighting: ON
No lighting: OFF
Flashing: Fault (see Eliminating faults)
 Fan stage display 1/2/3
 Automatic shut-off display
(see “Automatic shut-off”)
 Fan stage selector button 1/2/3





Maintenance and cleaning
Unplug switching power supply in case
of all cleaning and maintenance work!
Daily
1. Switch off appliance with button  and unplug switching power supply. Remove upper housing and
top up with fresh water into the lower housing. Mount top cover again. Switch on the appliance with
button .
LW Plus Bedien. intern. 2011_. 02.05.11 18:04 Seite 11