VENTS Extract axial fan OV1 Guide

www.ventsus.com
MIU_21-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [e-mail]
FAN INSTALLATION:
1) Disconnect the fan from power mains prior to any installation works.
2) Remove the cover from the terminal block. Mark holes on the wall.
3) Drill the holes in the wall.
4) Fix the fan. Connect the cables according to the wiring diagram. Install the terminal block cover.
1
2
2 3 4
3 4
The fan must be connected using durable, insulated and heat-resistant cables and wires. The external lead-in must be equipped with a QF automatic circuit breaker