Network Multimedia Hard Drive User Guide

10
7. Double click ‘Internet Protocol(TCP/IP)’ that you want to use on
your computer.
8. Check ‘Use the following IP address’, and write ‘IP address’ &
‘Subnet mask’ that you want to use.
For example,
IP address: 192.168.1.3
Subnet mask: 255.255.255.0
9. At above number 7) fi gure, click ‘Advanced’ Tab. Disable ‘Internet
Connection Firewall’.
✓ If you have already been provided dynamic IP address from DHCP Server or IP Router
on your local area network, you don’t need to write static IP address absolutely. Use
‘Obtain an IP address automatically on’ or write IP address & Subnet mask that DHCP
Server or IP Router provide.
✓ If you use service pack 2, refer to the following fi gures.
Click ‘Settings’ at ‘Windows Firewall’
Check ‘Off’ and click ‘OK’