Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
2-18
like to change the number.” If the call transfer service is currently disabled (off), you hear
the prompt, “Your calls are currently being transferred to voice mail. Press 1 if you would
like to change the number.”
Press * to toggle the call transfer service on (callers are transferred to the telephone) and off
(callers hear the mailbox greeting immediately). After you press *, the VP system voices a
confirmation prompt indicating the current state of service.
Press 1 if you want to enter a new call transfer number. The VP system asks you for the new
number, “Please enter the new number.” Once you enter the new number, the VP system
plays the confirmation prompt, “Your calls are currently being transferred to [number].”
Press # to accept the number and return to the Options menu, or press 1 to enter a different
number.
Note: Mailbox owners are barred from modifying the call transfer number if the
number is enclosed in brackets [ ] on the MAILBOX screen.
When you specify a call transfer number, you can enter the following special characters:
• ### is interpreted as a hook-flash.
• *** is interpreted as a pause. The default length of the pause is equal to one comma
(,). To remotely enter a longer pause, enter ****** (6 stars).
You may enter the number of a telephone outside of the telephone system, provided the
telephone system supports this feature and the VP system has been programmed to perform
external transfers. Long distance (toll) numbers can be restricted in the mailbox owner’s
assigned class of service.
2.6.5 Changing the Message Notification Service
If you press 5 from the options menu to change the message notification feature, the VP
system informs you of the current state of the feature, “Your message notification feature is
[telephone number],” or, “Your message notification feature is off. Press 1 to change the
number or press pound if you’re finished.”