Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-13
To Exit Press #
Follow the prompts to complete the procedure.
9. To record a personal greeting for the mailbox, press 2. You can record up to 10 personal
greetings for the mailbox (numbered 0 through 9). (Note that each mailbox owner can
also log into the mailbox and complete this task—this does not need to be performed by a
system supervisor.)
10. Once you record a greeting, the system voices the following prompts:
To Replay the Greeting Press 1
To Re-record the Greeting Press 2
To Delete the Greeting Press 3
To Choose a New Greeting Press 5
To Exit Press #
Follow the prompts to complete the procedure.
11. To change the mailbox password, press 3. Note that to change the password, you must
first enter the current password when prompted by the system. By default, the mailbox
password is the same as the mailbox number. (Also note that each mailbox owner can
log into the mailbox and complete this task—this does not need to be performed by a
system supervisor.)
Once you enter a new mailbox password and confirm the entry as prompted, the system
voices a prompt informing you that the new password will be in effect the next time the
mailbox is accessed.
12. To change the call transfer feature, press 4. (Note that each mailbox owner can also log
into the mailbox and complete this task—this does not need to be performed by a system
supervisor.)