Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-32
YES, the VP system transfers calls to the specified number. If the field is set to NO, the VP
system does not transfer calls, but takes messages instead.
VP: Transfer Schedule (Page 1 screen)
NTVP: During This Schedule (Call Transfer tab)
If the mailbox transfer type is any value other than NO TRANSFER, this field indicates when
calls to this box are transferred. The options are:
Schedule Result
ALWAYS Calls to this mailbox are transferred at all times.
DAY SERVICE Calls are transferred only during Day Service, as defined in
the BUSINESS HOURS screen.
NIGHT SERVICE Calls are transferred only during Night Service, as defined in
the BUSINESS HOURS screen.
SCHEDULE A, B, C, or D Calls are transferred only during the schedule, as defined on
the MAILBOX PAGE 3 screen (VP systems) / by pressing the
View Schedules button (NTVP systems).
Setting the CURRENTLY ENABLED? field to NO overrides the transfer schedule feature. The
VP system does not attempt transfers, but does play the greeting and takes a message.
NT-based VP system users can view and modify the schedules defined for the mailbox by
clicking on the View Schedules button.
VP: Password (Page 1 screen)
NTVP: Password (General tab)
When an owner tries to open his/her mailbox to retrieve messages, the VP system asks for a
password. The password can be up to 10 digits long and can consist of the digits 0 through 9
and the character *. For security reasons, it is recommended that box owners use passwords
at least 4 characters long and that they change them regularly.
If the password is set to 0000 (four zeros), the VP system allows access to the mailbox
without asking for a password. Use this feature with caution.