Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-36
NT-based VP system users can view and modify the classes of service by clicking on the
Review Class of Service button.
VP: Restricted - Client Of (Page 1 screen)
NTVP: Restricted Access (General tab)
If a valid mailbox number is entered into this field, the VP system treats this mailbox as a
restricted mailbox. A restricted mailbox can receive messages only from other mailbox
owners and can send messages only to its host mailbox, which is the mailbox number entered
in this field. The restricted mailbox cannot perform any other mailbox functions.
VP: (No such field)
NTVP: Uses VCM
This field indicates whether the mailbox owner is a Visual Call Management (VCM) user.
VP: Sequence to Turn ON/OFF Message-Waiting Lamp (Page 1 screen)
NTVP: Sequence to Turn on/off Message-Waiting Lamp (General tab)
This field indicates the sequence of digits the VP system uses to turn on the message-waiting
lamp at the extension associated with this mailbox. Consult the VP installation technician for
information on the entry that must be made in this field.
VP: New (Page 1 screen)
NTVP: New Messages (General tab)
This field cannot be changed from the keyboard. It indicates the number of new messages in
the mailbox. A message is new if the mailbox owner has not yet listened to it. Once the
owner has listened to the message, it becomes an old message. A mailbox can hold a
maximum of 200 messages.
VP: Old (Page 1 screen)
NTVP: Old Messages (General tab)
This field cannot be changed from the keyboard. It indicates the number of old messages in
the mailbox. Once the owner has listened to and/or saved a message, it becomes an old
message. A mailbox can hold a maximum of 200 messages.