Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-38
Note: This field is used to tell the VP system how long to wait between calls to the
paging service.
VP: Call Schedule (Page 2 screen)
NTVP: Activate Pager During These Times (Pager tab)
The pager notification feature follows a time schedule. The options are:
Schedule Result
ALWAYS Pager notification is available at all times.
DAY SERVICE Pager notification is available only during Day Service, as
defined on the BUSINESS HOURS screen.
NIGHT SERVICE Pager notification is available only during Night Service,
as defined on the BUSINESS HOURS screen.
SCHEDULE A, B, C, or D Pager notification is available only during the schedule, as
defined on the MAILBOX PAGE 3 screen (VP systems) /
by pressing the View Schedules button (NTVP systems).
VP: Enabled (Page 2 screen)
NTVP: Currently Enabled (Pager tab)
If this field is set to YES, the pager feature for this mailbox is currently on. If this field is set
to NO, the pager feature is off. Use this field to turn the service on or off from the keyboard.
Note that the mailbox owner also can call in and remotely turn the pager notification service
on or off.
Setting this field to NO overrides the call schedule set in the previous field.
VP: After Playing Greeting (Page 2 screen)
NTVP: After Playing Greeting area (Recording tab)
When a caller has been routed to a mailbox and is listening to the greeting, he/she always has
various options available by dialing the appropriate digit. If the caller does not dial a digit by
the time the VP system finishes playing the greeting, the VP system immediately takes
whatever action is specified in this field. If the caller does dial a valid digit from the
available options, his/her selection overrides the action entered in this field.