Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-40
Note: If the PAGER TYPE is DISPLAY / DIGITAL and the Pager notification service
is currently turned off (either manually or due to the call schedule), callers
hear the system prompt, “I’m sorry, I am unable to page that party right
now,” and the call continues by taking whatever action is specified in the
AFTER LEAVING MESSAGE field (VP systems) or AFTER RECORDING
MESSAGE field (NTVP systems).
• RECORD THEN PAGE
The VP system looks at what type of pager this mailbox is using. If the PAGER TYPE
field is set to NONE or the PAGER NUMBER field is blank, the VP system records a
message, but does not activate the pager.
If the PAGER TYPE is TONE, the VP system takes a message, then calls the pager. If
the PAGER TYPE is DISPLAY / DIGITAL, the VP system records a message, then calls
the pager. It sends the mailbox number to the pager display.
VP: If Caller Chooses “Other Options” (Page 2 screen)
NTVP: If Caller Chooses “Other Options” (Recording tab)
The caller chooses other options by pressing 3 during the mailbox greeting. You have the
following options:
Option Action Indicated
GO TO BOX Allows the call to route to another box. The new box number is
entered in the next field.
SAY GOODBYE The VP system says, “Good-bye,” and hangs up.
RETURN The VP system goes back to the previous box that handled this call
(usually a Routing box).
HANG UP The VP system immediately terminates the call by going on-hook.
VP: Box (Page 2 screen)
NTVP: (Unlabeled Box field) (Recording tab)
This field contains the box number to which the call is to be transferred when the option GO
TO BOX is selected in the corresponding field. This box is usually a Routing box containing a