Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-41
greeting or menu, or it is the mailbox number of an individual taking calls for this mailbox
owner.
VP: After Leaving Message (Page 2 screen)
NTVP: After Recording Message (Recording tab)
You have the following options:
Option Action Indicated
GO TO BOX Allows the call to route to another box. The new box number is
entered in the next field.
SAY GOODBYE The VP system says, “Good-bye,” then hangs up.
RETURN The VP system goes back to the previous box that handled this call
(usually a Routing box).
HANG UP The VP system immediately terminates the call by going on-hook.
The VP system follows the action specified here when:
• The caller has recorded his/her message, pressed # for further options, and pressed 1
to send or 4 to cancel the message.
• The AFTER PLAYING GREETING field specified WAIT FOR DIGIT, and the caller did not
enter a digit.
• The AFTER PLAYING GREETING field called for a paging option, but the pager’s
ENABLED field is set to NO (in this case, the caller first hears the system prompt, “I
am not able to page that party right now.”).
VP: Box (Page 2 screen)
NTVP: (Unlabeled Box field) (Recording tab)
This field contains the box number to which the call is to be transferred when the option GO
TO BOX is selected in the corresponding field. This box is usually a Routing box containing a
greeting or menu, or it is the mailbox number of an individual taking calls for this mailbox
owner.