Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-51
To modify the company business hours through the DOS-based VP system screen
interface:
1. From the Main menu, select SYSTEM INFORMATION. The Box Information menu
displays.
2. Highlight BUSINESS HOURS from the menu then press <Enter>. The BUSINESS HOURS
screen displays.
3. Modify the business hours on the BUSINESS HOURS screen. For information on making
modifications to fields on this screen, consult the information provided below and the
program’s online help file (accessible by pressing <F1>). When you have made
necessary modifications, press <F10> to save the changes.
To modify the company business hours through the NT-based VP system screen
interface:
1. From the Main screen, access the SYSTEM pull-down menu.
2. Select BUSINESS HOURS from the menu. The BUSINESS HOURS screen displays.
3. Modify the business hours on the BUSINESS HOURS screen. For information on making
modifications to fields on this screen, consult the information provided below and the
program’s online help file (accessible by pressing <F1>). When you have made
necessary modifications, select the Save button to save the changes.
Working with the Business Hours Screen
Note: See section 1.4.9 for screen illustrations.
For each day of the week, enter the opening and closing times for the business. If the
business is closed all day, enter 00:00 in both the DAY SERVICE BEGINS and DAY SERVICE
ENDS fields. This places the VP system in the Night Service mode for that entire day.
If the business is open 24 hours on a particular day, enter 00:00 for the DAY SERVICE BEGINS
time and 24:00 for the DAY SERVICE ENDS time.