Installation manual

SYSTEM SUPERVISOR AND SUBSCRIBER GUIDE 9.0 VER. 1
1-63
Routing boxes on the system. Because you usually set up Routing boxes with at least 2
greetings, this parameter must be set to at least 2 in the supervisor mailbox class of service.
VP: Maximum Greeting Length
NTVP: Maximum Greeting Length (Greetings tab)
When a mailbox owner calls in to re-record his/her personal greeting, the VP system limits
the length of the new greeting to the value entered in this field. The default setting is 60.
VP: Maximum Number of Messages
NTVP: Maximum Number of Messages (Messages tab)
The VP system can hold up to 200 messages per mailbox. However, you may want to restrict
some mailboxes to a lower limit (to conserve disk space). Use this field to define the
maximum number of messages that can be stored in mailboxes assigned this class of service.
Once the limit is reached for a particular mailbox, callers attempting to leave more messages
in the mailbox are told that the box is full. The default setting is 200.
VP: Maximum Message Length
NTVP: Maximum Message Length (Messages tab)
The value in this field defines the maximum length of a message (in seconds) that a caller can
leave for mailboxes belonging to this class of service. The default setting is 60.
VP: Automatically Delete Old Messages from System After X Days
NTVP: Automatically Delete Old Messages from System After X Days (Messages tab)
The VP system deletes messages saved as Old from mailboxes belonging to this class of
service after the number of days you specify. An old message is one the mailbox owner has
listened to, but has not yet deleted. If you enter 0 in this field, an old message is deleted at
midnight on the day the message became old. If you enter 1 in this field, an old message is
deleted at midnight on the day following the day the message became old.
To disable deletion of Old messages, enter 99 in this field. However, do this with caution,
since accumulating messages may create disk storage problems. The default setting is 30.