User Manual

082-32-001
NURIT /3010  User Manual 77
APPENDIX C
INSTALLING/REMOVING PAPER ROLL
Note: See illustration on the opposite page.
Removing an Empty Paper Roll:
1. Remove the paper compartment cover by grasping it on both sides
and lifting it towards you and upwards.
2. Remove the paper roll core and spindle. Discard the core but save the
spindle to be used with a new paper roll.
3. Remove any paper left in the printing mechanism by simultaneously
pressing the <FUNC> and <CLEAR FEED> buttons in short
increments.
CAUTION: Do NOT pull the paper backward through the
printer mechanism. This may damage the printer and void your
product warranty.
Inserting a New Paper Roll:
1. Unroll the new paper roll so that the imprinted side of the paper is
facing you. Note that some paper manufacturers do NOT imprint on
the roll. See illustration on the opposite page.
2. Using a scissors, cut the leading edge of the paper roll so that it is
perpendicular to the paper feeder and NOT jagged.
3. Insert the leading edge of the paper underneath the printer
mechanism’s rubber platen roller. The printer mechanism should
automatically catch and feed the paper. Press the <FUNC> and
<CLEAR FEED> buttons simultaneously in short increments until
the paper exits a few more centimeters.