User's Manual

Job#: 0.0??? Title: VA04 Manual
Date: 11/04/09 Version: VA04-MAN-Rev9
11
Operating your Rise & Shine
®
Your Rise & Shine has a wealth of features. Using them is made simple by the
Rotary Selector Control/Selector Button, the large round knob on the front panel of
the unit.
The Rotary Selector Control knob is used to make selections from displayed
menus, by turning the knob right or left, and is also used to enter your choices, by
pressing the knob, which doubles as a “press-to-choose” button. You then “press-
to-choose” your selection by pressing the Rotary Selector Control.
For example:
• Turn the Rotary Selector Control left (down) or right (up) to change the FM
frequency.
• Turn the Rotary Selector Control right to move down menus.
• Turn the Rotary Selector Control left to move up menus.
• When playing MP3’s, turn the Rotary Selector Control to navigate fi le
directories on a SD Card or USB Drive.
The Audio Input Selector
The Audio Input Selector is used to select AUX, FM, USB Drive or SD Card audio
input. Turning the control to OFF means that no audio input is selected.
Controlling the Volume
The Volume Control sets the volume for FM, USB and SD inputs. Volume for an
AUX device is also controlled by the Volume Control. Volume for some devices
may also be controlled by the device that is attached to the AUX input. The volume
of an iPod
®
, for example, can be controlled by both the iPod and the Rise & Shine
Volume Control.
Using the Brightness Control
The Rise & Shine Brightness Control has two purposes:
• To set the initial brightness for the Sleep Cycle.
• To set the brightness of the LED light panel and optional auxiliary lamp for
general lighting, when not in a Sleep or Wake Cycle.
When the Sleep Cycle begins (when you press the Sleep button), the current
Brightness Control setting is used as the initial brightness for the Sleep Cycle.
VA04_Man_Rev9.indd 11VA04_Man_Rev9.indd 11 11/4/09 1:38 PM11/4/09 1:38 PM