User's Manual

14
Setting and Using WAKE SET continued
Duration Settings
From the WAKE SETTINGS menu:
1. Use the Rotary Selector Control to highlight DURATION: 5 MINUTES.
2. Press the Selector Button.
3. From the WAKE DURATION sub-menu, use the Rotary Selector Control to
highlight 5 MINUTES, 15 MINUTES or 30 MINUTES.
4. Press the Selector Button to choose the highlighted selection. The display
returns to the WAKE SETTINGS menu.
Light Settings
From the WAKE SETTINGS menu:
1. Use the Rotary Selector Control to highlight LIGHT: TOP AND LAMP (TOP
AND LAMP is the default setting).
2. Press the Selector Button.
3. From the WAKE LIGHT sub-menu, highlight TOP ONLY, LAMP ONLY, TOP
AND LAMP or NONE.
4. Press the Selector Button to choose the highlighted selection. The display
returns to the WAKE SETTINGS menu.
5. For the Wake Cycle, the LED light panel and optional external lamp increase
from “OFF” to maximum brightness at the set alarm time.
Volume Settings
From the WAKE SETTINGS menu:
1. Use the Rotary Selector Control to highlight VOLUME: 25 (25 is the default
setting).
2. Press the Selector Button.
3. From the WAKE VOLUME sub-menu, turn the Rotary Selector Control to
choose a volume between 0 and 25.
4. Press the Selector Button to choose the displayed volume setting. The display
returns to the WAKE SETTINGS menu.
Sound Settings
From the WAKE SETTINGS menu:
1. Use the Rotary Selector Control to highlight SOUND: NONE (NONE is the
default setting).
2. Press the Selector Button.
VA04_Man_Rev9.indd 14VA04_Man_Rev9.indd 14 11/4/09 1:38 PM11/4/09 1:38 PM