User Guide

7
Bulb Replacement Instructions
Correctly seated bulb Incorrectly seated bulb
C
B
A
C
B
A
No
gap
Notice
large gap
D
Installation
1. Unplug the lamp from power source.
2. Firmly hold the base (B) and push bulb (C)
into the socket (A).
3. Be sure the bulb is firmly seated in the
socket (see below) and snapped into the
metal bulb clip (D).
4. Replace grid diffuser.
Removal
1. Unplug the lamp from the power source.
2. To access to the bulb, remove the grid
diffuser by depressing the tab and lifting it
out (see page 6).
3. Firmly hold the bulb base (B) and pull
the bulb (C) from the socket (A) in
an outward motion.
NO
YES
CAUTION: ALWAYS UNPLUG LAMP BEFORE PERFORMING BULB
REPLACEMENT OR INSTALLATION.
MISE EN GARDE : TOUJOURS DÉBRANCHER LA LAMPE AVANT DE
REMPLACER OU DE POSER L’AMPOULE.