Instructions Manual

Pub. #OM17-MSP3

6-33

Figure 13.2 External Controller circuit board (metal cover removed)

3. Test voltage coming out of External Controller to solenoids. Disconnect the weather-pack

connectors in line from Controller to the solenoids. Using a digital voltmeter set to read voltage,

insert leads into connector coming from Controller. Activate manual raise-lower switch and

read voltage. (Figure 13.3) Voltage should be 12 volts.

Figure 13.3 Testing voltage on power leads to solenoid.

5V 2

SOLENOID

LED’s

12V C

DOWN