User guide

8
Inserting and removing SIM Card
You may need to insert a Verizon SIM card before you start
using your device. If there is no SIM card installed, the
message “NO SIM CARD” appears on the device’s lock screen.
Your device uses a 4G LTE SIM card. The SIM card is used to
store your phone number, contacts, and more.
If you purchased your device at a Verizon Wireless store, the
SIM card is activated and ready to use. If you ordered a new
device, the card may need to be activated before you can use
it. For more information about activating the SIM card, visit:
verizonwireless.com/4GLTE
IMPORTANT!
Turn the device off before installing or removing the SIM
card. To turn the device off, press and hold the Power/
Lock key and tap Power off > OK.
& NOTE!
If not already installed, follow the instructions below to
insert your 4G LTE SIM card.
Open the cover to the SIM card slot and carefully 1.
insert the 4G LTE SIM card with the Verizon logo
facing up.
Push the SIM card into the slot until it clicks into2.
Replace the SIM card slot cover.3.
CAUTION!
DO NOT bend or scratch the SIM card. Take care when
handling, installing, or removing the SIM card, and avoid
exposing the SIM card to static electricity, water, or dirt.
Keep the SIM card out of reach of small children.