Operation Manual

030-300554 Rev. A 75 June 2008
Verizon FiOS Router
(
Model 9100EM
)
User Guide
12.2.2 Broadband Connection (Ethernet)
The Router’s Broadband Connection describes the hardware used to connect the Router to the Internet. A Broadband
Ethernet connection connects the Router to the Internet using an Ethernet cable. By default Broadband Connection
Ethernet is Disabled. However, you can use the Ethernet port labeled WAN on the back of the Router to connect
your Router to the Internet. In this setup, you will install the Router so that it connects (via Ethernet) to another
Internet device that provides WAN access. If you use the Router’s WAN port, you will also need to change the
Router’s network connection settings.
To change the Router’s network connection settings, in the Network Connections screen, click the Broadband
Connection (Ethernet) link.
The following screen appears. View the connection setting properties in this screen. If you change the connection
name, click Apply to save the changes.