Operation Manual

030-300554 Rev. A 84 June 2008
Verizon FiOS Router
(
Model 9100EM
)
User Guide
You may use this section to remove VLAN tags to your incoming (Ingress) packets, or allow specific tagged packets
to enter. To add a new entry, click the New Entry link. The following screen appears. Enter the desired port in the
VLAN ID in the field, and then select an Egress Policy from the drop-down list. Click OK.
The following screen appears. The VLAN ID displays the port that you added. Click Apply to save the settings.
For outgoing (Egress) packets you may enable a Rate Limit by checking the rate limit check box, and you may also
enable the pass through of standard QoS classifiers. These are 802.1p, DSCP, and port tags. Note that any
changes to your egress setting will likely result in a disruption of your FiOS service.