Verizon Router CR1000A User Guide
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device complies with Part 15 of the FCC Rules.
Important Notice The user is responsible for determining whether surfaces and installation environments are appropriate. Please remember that many factors influence installation safety. Please follow the user manual. Materials, flatness, cleanliness of surfaces, humidity, wind speed, time and many other factors can affect the adhesiveness and fixedness of this product. Verizon does not guarantee the product can be fixed and will not fall.
Chapter 1 Introduction .................................................................................................................... 1 Unboxing Information ........................................................................................................... 1 Product Overview ................................................................................................................ 2 LED and Audio Behavior ....................................................................................
Chapter 1 Introduction The Verizon Router provides superior Wi-Fi performance with Tri-band support and low latency to support gaming and VR use cases. The innovative design of the Verizon Router allows customers to connect their favorite devices to Verizon’s 5G Network.
Product Overview Front LED Bottom Bracket screw hole Part Description LED The LED lights up in different ways to indicate the connectivity status of the Verizon Router.
Rear panel WPS button RJ45 port Coax Reset pin hole DC jack Part Description WPS button Press this button once to connect the Verizon Router to Wi-Fi Extender or devices via WPS. After the pairing is successful, the LED light will stop blinking blue. RJ45 port Connect the Verizon Router to PC or switch via an Ethernet cable. Coax Connect the Verizon Router to your TV via a coaxial cable. Reset pin hole Factory reset the device by pressing the pin hole for 5 seconds.
LED and Audio Behavior Front LED Status Device booting up Soft blink white Solid white Setup complete 50% brightness solid white Signs of life Hard blink red Hardware/system failure; no Internet connectivity Soft blink white Firmware update/Factory reset in progress Fast blink red Firmware update error Soft blink yellow Wi-Fi is disabled Hard blink blue WPS pairing in progress Fast blink blue WPS pairing is successful Fast blink red WPS pairing has failed 已註解 [YH1]: What does this mean
Chapter 2 Setup and Activation Installation, Activation, and Setup This section describes how to set up and configure your Verizon Router. Setting up the Verizon Router 1. Unbox the Verizon Router, AC adaptor, and Ethernet cable. 2. Attach the power cord to the AC wall adapter power supply. 3. Plug the power cord into the power port on the back of the Verizon Router. 4. Plug the power adapter into an AC wall outlet. 2.
Chapter 3 Product Specifications 1. Wi-Fi 2.4GHz 802.11ax 4×4 MIMO 5GHz 802.11ax 4× 4 MIMO 6GHz 802.11ax 4×4 MIMO Backwards compatible with 11ac/11n/11b IoT Bluetooth® 5.0 Memory Router: 1 GB DDR4 RAM × 2 Storage Router: 4 GB eMMC Dimensions 120 x 120 x 250.25 mm Weight 1.344 KG Connector 10GbE Ethernet × 1 (WAN) 10GbE Ethernet × 1 (LAN) 2.5GbE Ethernet × 2 (LAN) MoCA2.5 × 1 (LAN) USB Type C 3.