User manual

USB720 Modem USER GUIDE

Using the USB Modem Extension Cable

The USB720 Modem package includes an extension USB Y-shaped cable. Although the cable is not required for use

with your USB720 Modem, it offers increased performance of your USB720 Modem under certain operating

conditions. Simply insert the USB connector into the USB port of your computing device to deliver power boost,

increased RF performance, and to solve clearance issues.

Using the USB Modem Extension Cable:

1. Plug the single end of the Y-shaped cable into the USB720 Modem. [A]

2. Depending on the condition you are trying to solve (power boost, increased RF performance, or clearance

issues), plug either one of the two connected ends of the USB modem extension cable into the Type A USB

port(s) on your computer. [B]

Note: The USB modem extension cable connector labeled #1, is the primary

data power cable used to either extend the USB720 modem away from your

computer allowing you to locate the modem in a more optimum signal location

or solve any computer USB port clearance issues. The USB modem extension

cable connector labeled #2, is a power boost cable and must be used with

connector #1 to provide the modem up to 1Amp of current for use in weaker

signal areas.

3. The device is connected to and powered by the computer as soon as the USB cable is plugged properly into

the appropriate Type A USB port(s).

4. Launch VZAccess Manager and click Connect.