User manual

USB720 Modem USER GUIDE

Inserting and Removing the USB720 Modem

Connecting the USB720 Modem

Before you connect the USB720 Modem to your computer, you must first install VZAccess Manager (see the

VZAccess Manager User Guide located on the Installation CD).

When you connect the USB720 Modem, the following should occur once VZAccess Manager has been

installed:

• The label of the USB720 Modem must be facing up.

• The USB720 Modem is powered as soon as you connect it to the Type A USB port of your computing

device. Although the modem is powered, it does not automatically connect to the Internet.

• The LED indicator on the device lights up.

• The VZAccess Manager Software starts (unless the auto-launch feature has been disabled).

The USB720 External Flip-Up Antenna

The USB720 Modem contains a flip-up antenna that helps maximize the RF signal; this is an integral part of the

modem. To raise the antenna, flip-up the antenna by gently gripping the top right side of the external cover with your

forefinger.

Turning Off the USB720 Modem

To turn off the USB720 Modem, first terminate your Internet connection session. Alternatively the USB720 Modem

may be removed after the computing device is shutdown or turned off.

Note: Once you have connected the USB720 Modem, avoid removing it before your Internet connection is

terminated, as some operating systems may be unable to respond to the sudden change in operation,

causing automatic shutdowns or screen freeze issues.

Removing the USB720 Modem

The USB720 Modem’s technology allows you to safely remove the USB720 Modem at any time when you are not

connected to the network.

• Simply grip the USB720 Modem on both sides and pull straight out to avoid damaging the USB

connectors.