INSTALLER/CONSUMER SAFETY INFORMATION PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE. WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. Electric Fireplace Model DEF33/36; DEFD33/36 FOR YOUR SAFETY Service must be performed by a qualified service agency. DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Table of Contents Please read the Installation & Operating Instructions before using this appliance. Thank you and congratulations on your purchase of a Vermont Castings, Majestic Products fireplace. IMPORTANT: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and/or injury, and will void the warranty.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Installation Instructions General Information 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (1 m) from the front of this appliance.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Fireplace Dimensions Rough Opening Depth H M L G M O K - Rough Opening Width Rough Opening Height N F J B C D E I A Fig. 1 Fireplace specifications and framing dimensions Ref.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Mantels The height that a combustible mantel is fitted above the fireplace is dependent on the depth of the mantel. This also applies to the distance between the mantel leg (if fitted) and the fireplace. For the correct mounting height and widths, refer to Figures 2a, 2b and the Mantel Chart below. The distances and reference points are not affected by the fitting of a bay window front trim kit.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Framing and Finishing Electrical Connection 1. Choose fireplace location. 2. Place fireplace into position. 3. Frame in fireplace with a header across the top. It is important to allow for finished face when setting the depth of the frame. 4. Attach fireplace to frame using adjustable frame drywall strips (Fig. 3). Preset depth to suit facing material—adjustable to 1/2", 5/8" or 3/4" depths (Fig. 3). 5.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 A40 A38 (B116) A39 (B115) (B119) A37 (B117) (B118) 1005694 Fig. 4 DEF33/DEFD33 Logset Installation of DEF33 Logs MVC_002F Fig. 5 DEF36/DEFD36 Logset Installation of DEF36 Logs Refer to Figure 4. Refer to Figure 5. 1. Turn off power to the unit. 1. Turn off power to the unit. 2. Remove front glass (See "Glass Removal" section), or open front doors. 2. Remove front glass (See "Glass Removal" section), or open front doors. 3.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Service Instructions Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury. Glass Frame Removal NOTE: Applicable only to units with fixed glass door. 1. 2. 3. 4. Turn off electrical supply to unit. Let fireplace cool if it has been operating. Open access panel Radiant. Remove two door retention screws along lower sides edge of door frame. 5.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Electrical Wiring Diagram with Integral Remote Control Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance with national and local codes. If repairing or replacing any electrical component or wiring, the original wire routing, color coding and securing locations must be followed.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Electrical Wiring Diagram without Integral Remote Control FAN MOTOR 4 6 11 HEATER ELEMENT 4 RED 10 5 WHITE WHITE BLACK 4 FLAME MOTOR 11 13 5 5 WHITE 14 4 RED 3 6 WHITE + SPEED CONTROL - 3 BLACK WHITE T' S T A T 2 BLACK RED S W I T C H 8 1 BLACK BREAKER CIRCUIT O N/ O F F 7 9 2 Component Identification: 1. 2. 3. 4. 5. 6. 7. 8. Motor, Variable Speed 12VDC Switch ON/OFF Thermostat Fan/Heater Light Socket with Wiring Assem.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Operating Instructions The control compartment is located behind the panel access Radiant. To access the controls, simply flip down the panel access Radiant. Refer to Fig. 8, below, to locate the position of each control. 2. Heater Control The Heater Control acts to turn the heater ON and OFF as well as setting the comfort level in the room. Turning the knob clockwise from the OFF position will place the heater into operation.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 26 15 14 17 25 7 15 16 8 6 19 22 11 10 4 20 12 13 3 5 2 21 23 216mm [8 1/2"] (DISTANCE (DISTANCE BETWEEN TWO SOCKETS) 216mm [8 1/2"] (DISTANCE (DISTANCE BETWEEN TWO SOCKETS} DEF33/ DEFD33 1d 24 1a 305mm [12"] DEF36/ DEFD36 1a 1b 1c 1c 1b 1c 1e 5898 / 0903 Vermont Castings, Majestic Products reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 DEF33/36; DEFD33/36 Electric Fireplace 1. 1a. 1b. 1c. 1d. 1e. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Bay Window Installation CAUTION: Remove all plastic from brass trims. Do not remove existing frame window assembly. Louvre Removal To remove top louvre, pull the louvre up and then lift it out (Fig. 9). 1. Remove existing bottom louvre and hinges from fireplace, if the fireplace has been installed with louvres. (Set aside the four [4] screws). 2.
Vermont Castings, Majestic Products, DEF33/36, DEFD33/ 36 Direct (Hard) Wiring Electric Fireplace Models DEF33/ DEF36/ DEF36S2 WARNING:This procedure must be conducted by a qualified electrician, in accordance with National and local codes. In the U.S.A., the installation must conform to the National Electrical Code, ANSI/NFPA No. 70. In Canada, the installation must conform to the current CSA C22.1 Canadian Electrical Code.
1 YEAR WARRANTY For Vermont Castings, Majestic Products Electric Fireplace Models BASIC WARRANTY: Vermont Castings, Majestic Products (hereinafter referred to collectively as the "Company") warrants that your new Vermont Castings, Majestic Products appliance is free from manufacturing and material defects for a period of one year from date of installation, subject to the following conditions and limitations: 1.