Operating Instruction

23
Fig.5.2
Fig.5.5
A
B
Fig.5.4
Fig.5.1
S
F
C
T
CORRECT REPLACEMENT
OF THE SEMI-RAPID
BURNERS
It is very important to check that the
burner flame spreader “F” and the cap
“C” have been correctly positioned (see
figs.5.1and5.2).
Failure to do so can cause serious
problems.
CORRECT POSITION OF
TRIPLE RING BURNERS
The triple ring burner must be correctly
positioned (see fig. 5.3); the burner rib
mustbe fittedintheir housingasshown
bythearrow.
Theburnercorrectlypositionedmustnot
rotate(fig.5.4).
Thenpositionthecap"A"andthering"B"
(figs.5.4-5.5).
T
S
Fig.5.3
BURNERS AND GRIDS
• These parts can be removed and
cleanedwithappropriateproducts.
• Aftercleaning,theburnersandtheir
flamedistributorsmustbewelldried
andcorrectlyreplaced.
• It is very important to check that
the burner flame distributor and the
cap has been correctly positioned -
failure to do so can cause serious
problems.
• Check that the probe “T” (figs. 5.1-
5.3-5.6)nexttoeachburnerisalways
cleantoensure correct operationof
thesafetyvalves.
• Check that the electrode “S” (figs.
5.1-5.3-5.6) is always clean to
ensuretrouble-freesparking.
• Note: To avoid damage to the
electric ignition do not use it when
the burners are not in place.
Both the probe and ignition plug must
be very carefully cleaned.
5