Install Guide

1515
2
STEP 3
Assemble the extension pipe + pressure regulator group to the range manifold interposing the gasket supplied.
The regulator cover must be ordiented toward the front side of the range.
IMPORTANT: use two spanners to tighten the connection.
STEP 4
Fix the extension pipe support bracket
onto the back of the range using the two
supplied screws.
Take care to ensure the bracket is tted the
right way up with the opening at the top.
The regulator cover must be ordiented
toward the front side of the range.
Fig. 2.4
Fig. 2.5
B
B
Gasket