Installation Instructions

1111
Fig. 1.8
Fig. 1.9
ASSEMBLING THE BACKGUARD
It is mandatory to install the backguard
• Assemble the backguard as shown in figure
1.8 or 1.9 and fix it by screwing the 5 screws
“
A ” (which are already fixed on the back of
the cooktop).
• Do not remove the 3 spacers “ B ” already
fitted on the back of the backguard.
A
A
B
B
A
A
B
B
1
IMPORTANT: THE BACKGUARD IS NOT PACKAGED WITH THE APPLIANCE
BUT IT IS SUPPLIED SEPARATELY BY THE DISTRIBUTOR.
WITH RESPECT TO THE FIGURES BELOW, ONE ADDITIONAL BACKGUARD
(HEIGHT = 4” OR HEIGHT = 2”) IS ALSO AVAILABLE FOR RANGE DEPTH =
25” ½.
IT IS MANDATORY TO INSTALL THE BACKGUARD.