User Operating Instructions

25
REMOVING THE OVEN DOOR
The oven door can easily be removed as follows:
– Open the door to the full extent (fig. 5.11a).
– Open the lever “A” completely on the left and right hinges (fig. 5.11b).
– Hold the door as shown in fig. 5.11.
– Gently close the door (fig. 5.11) until left and right hinge levers “A” are hooked to part
“B
” of the door (fig. 5.11b)
– Withdraw the hinge hooks from their location following arrow “C” (fig. 5.11d).
– Rest the door on a soft surface.
– To replace the door, repeat the above steps in reverse order.
REFITTING THE OVEN DOOR
– Hold the door firmly (fig. 5.11).
– Insert the hinge tongues into the slots, making sure that the groove drops into place
as shown in the fig. 5.12a.
– Open the door to its full extent.
– Fully close the levers “A” on the left and right hinges, as shown in the figure 5.12b.
– Close the door and check that it is properly in place.
Fig. 5.11
Fig. 5.11a
B
A
Fig. 5.11b
C
A
Fig. 5.11d
Fig. 5.12b
Fig. 5.11c
Fig. 5.12a
5
Important!
Always keep a safe distance from the door
hinges, paying special attention to position
of your hands.
If the door hinges are
not correctly hooked,
they could unhook
and close suddenly
and unexpectedly
with risk of injury.