- VERTEX STANDARD VX-820 OPERATING MANUAL

VX-820 OPERATING MANUAL
15
ADVANCED OPERATION
OPTION SW1
Press the assigned programmable key to toggle the
optional accessory “1” “On” and “Off.”
OPTION SW2
Press the assigned programmable key to toggle the
optional accessory “2” “On” and “Off.”
EMERGENCY
The VX-820 series include an “Emergency” feature
which may be useful for alerting another party moni-
toring on the same frequency as your transceiver’s
channel.
Press the assigned programmable key to initiate an
emergency call. For further details contact your
Dealer.
HOME CHANNEL
Press the assigned programmable key to recall the
pre-defined Home group/channel. When you recall
the Home group/channel, the “
HH
HH
H
” notation will ap-
pear on the LCD.
SELECTABLE TONE
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-defined
tone table. You can operate using the indicated sub-
audible tone in the Selectable Tone mode.
DIRECT CH#1 TO #4
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
REC/PLAY
(
VOICE STORAGE: OPTION
)
This function allows your radio to record a received
voice message, and to play back the recorded audio.
It requires installation of the optional Voice Record-
ing Unit.
Recording;
Press the assigned programmable key for 1.5 sec-
onds to enable the Voice Recording Mode. If the in-
coming signal is received, so as to un-mute the
squelch and pass audio, then the “
” Icon will flash
and received audio will be recorded. When the voice
recording is completed, the “
” stays on.
Playback;
Press the assigned programmable key momentarily
to play back the last message.