- VERTEX STANDARD VX-820 OPERATING MANUAL

VX-820 OPERATING MANUAL
19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SQL
SCN List
BEEP
BELL
Lighting
Lock
Group
SCAN
DW
TA
AF MinVR
Beep VR
Contrast
Pitch
REC Mode
Play Mode
Select the Squelch Threshold Level
Select the Scan List “User” or “Dealer”
Set the Beep On/Off
Set the Bell On/Off
(Bell engaged by sub-audible CTCSS/DCS)
Set the BUSY/TX LED On/Off
Set the Lock function to be Locked
(Key/PTT/Key+PTT)
Set the Operation Group
Set the Scan status
(same function as Scan key)
Set the Dual Watch status
(same function as DW key)
Set the Talk Around status
(same function as TA key)
Set the Minimum Volume level
Set the Beep volume level
Set the LCD contrast
Not available at this time
ONE: Enables recording one message (max.
120 seconds), and playback from the
beginning of the message.
ROL: Enables recording whenever squelch
opens, and playback of the last 120
seconds.
Set the priority audio on playback mode.
PLY: Playback audio is higher priority than re-
ceived signal
SIG: Received signal is higher priority than
playback audio
DISPLAY DESCRIPTION
Note: The menu “15: REC Mode” and “16: Play Mode” will ap-
pear only when the Voice Recording Unit is installed.
USER SET MODE
The VX-820 Series includes a “User Set (Menu)”
Mode which allows the user to define or configure
various settings, such as Beep On/Off, Squelch, LCD
contrast, etc. To activate the “User Set (Menu)”
Mode:
 Press the assigned programmable key for the
“SET” function to enter the “User Set Mode.”
 Select the User Set Mode Item you want change
using the CH selector knob.
 Press the MONITOR/LAMP button to select the
status of the selected item.
 Press PTT switch to exit to normal operation.