Product Manual

rev. 3/20/2013 A-Lift, manual.doc
Parts List
“Standard Units” refers to A-Lift-R, -S, & -CB models; “HP Units” means A-Lift-R-HP, -S-HP, and -CB-HP models; “EHP
Units” indicates A-Lift-S-EHP and –CB-EHP models.
Diagram
Number De
scription
Part
Number Quantity
Diagram
Number Description
Part
Number Quantity
1 Operator Handle A-Lift-1 1 17 4 inch Fixed Wheel A-Lift-CB-17 2
2 Loading Wheels A-Lift-2 2 18 Adjustable Leg (-CB
counterweight base
models)
A-Lift-CB-18 2
3 Upper Inner Frame
Pulley (casting)
A-Lift-3 1 19 5 inch Swivel Castor A-Lift-CB-19 2
4
4a
Large Pulley
Large cable anchor
bolt & nut
A-Lift-4
A-Lift-4a
3
3
20 Counterweight Base A-Lift-CB-20 1
5 Cable (Standard Units)
Cable (HP & EHP Units)
A-Lift-5
A-Lift-HP/EHP-5
1 21 Caster: 2in. double wheel A-Lift-R-21 2
6 Telescoping Inner Mast
Frame (only HP & EHP
Units)
A-Lift-6 1 22 Legs - Standard base (R
models)
A-Lift-R-22 2
7 Mast Frame A-Lift-7 1 23 Solid Rubber Wheel A-Lift-23 2
8 Decal Plate A-Lift-8 1 24 Brake (optional) A-Lift-24 1
9 10 in. Pneumatic wheel
(optional)
A-Lift-9 2 25 Fork Lock Pin A-Lift-25 4
10 Carriage A-Lift-10 1 26 Winch Mounting Bracket A-Lift-26 1
11 Fork Mounting Tube A-Lift-11 2 27
27a
27-SPG
Winch
Winch Handle
Winch Spring
A-Lift-27
A-Lift-27a
A
-Lift-27-SPG
1
1
1
12 Fork A-Lift-12 2 28 Not Available N/A N/A
13 Adjustable Leg
(Straddle base)
A-Lift-S-13 2 29 Deck Platform (optional) A-Lift-Deck 1
14 Lower Inner Frame
Pulley (casting)
A-Lift-14 1 30 [-S models with 4-point
casters]
4in. caster – option A
5in. caster – option B
A-Lift-29A
A-Lift-29B
15 Leg Lock Pin A-Lift-CB-15 2 31-32 Not Available N/A N/A
16 Caster: either 2in.
(option A) or 2½ in.
(option B)
A-Lift-S-16 2 33
33a
Small pulley
Small Cable Anchor Bolt &
Nut
A-Lift-33
A-Lift-33a
1
1
Assembly Instructions
Vestil ships winch lifts to its customers in a mostly assembled form. The minimal assembly that is required differs by
model, so follow the directions that correspond to your lifter.
If you purchased an A-Lift-R or A-Lift-S, you will receive 3 pieces:
Support leg
openings
1). Main Assembly
3). Box 2 contains:
forks (2).
2). Box 1 contains: standard support legs (2),
fork retaining pins (4), winch handle (1).
Copyright 2012 Vestil Manufacturing Corp. Page 4 of 12