Product Manual

rev. 3/20/2013 A-Lift, manual.doc

Step 4: Move the load to the desired location.

fter you arrive at the unloading

destination:

 Lock the castors or set the

brakes;

 Unlock the winch handle and

turn it clockwise until the

load is positioned at a

comfortable height;

 Lock the winch handle;

 Remove the load.

 Lower the forks until they are

a few inches above the legs.

Step 5: Return the lifter to its storage location. Engage the brakes, fold the winch handle, fully lower the forks, and

set the handle latch pin to lock the winch handle

To store the lifter, choose a location:

1. where the unused lifter cannot interfere with or obstruct other traffic or operations;

2. that is protected from weather;

3. where the surface is smooth and level;

4. that is free of debris including liquids.

Using the Deck Platform

Slide the connecting channel (indicated with an arrow)

under the lower carriage cross bar.

Set the connecting channel on top of the lower carriage

cross bar

;

let the deck rest on to

of the forks.

After you finish usin

g the deck, remove it and store it in a dry location.

Transporting the lifter: before loading the A-lift into a transport vehicle, perform the following steps to minimize the

chance of damaging the lifter:

1. Remove the forks and store the

forks and fork retaining pins.

2. Lower the carriage completely.

3. Rotate the pivoting carriage

latch as shown by photos a & b

to the right.