Product Manual

Step 2: Couple I-beam to telescoping tubes

Insert the flange of the I-beam into the gap between the beam clamp and the top of the teletubes (see dotted oval and

arrow in “Clamp the I-beam to the tops of the teletubes” below); then secure the flange on the opposite side to the top of

the teletubes by installing the remaining beam clamps as shown in the diagram below.

Fig. 2A: End View of I-beam Connection to Beam Bracket of Teletube

Fig. 2B: Clamp the I-beam to the tops of the teletubes

I-beam

Teletube

I-beam

Welded beam clamp

*Item no. Part no. Description Quantity

5 33626 ½ in. lock washer 8

6 19211-A ½ in. – 13 structural nut 8

7 19211-B ½ in. – 13 x 2 in. bolt 8

10 or 11 28-516-053 Welded beam clamp 4

*Item numbers match item numbers from exploded parts diagrams on p. 5 - 17.

Fig. 2D: Top view of beam connection to

teletube

Fig. 2C

: Exploded Parts View of Beam Clamp Connection to Beam Bracket

Lower beam flange

Beam

bracket

Teletube