Specifications

20
1 Control lever
The control lever works as shown in the
diagram.
Every control lever is designed to operate
1 or 2 engines.
Starting from neutral put the engine in
placed in forwards or reverse by moving
the lever 16° forwards or backwards.
The throttle lever operates at an angle of
62° forwards and 62° reverse.
2 Control lever keyboard
There is a keyboard with 4 operating
switches and 4 LEDs on the lever.
(*) Both Engine switches and LEDs refer
to the same engine where the installation
only has one engine.
The port Engine switch and LED refer to
the port engine and the starboard Engine
switch and LED refer to the starboard
engine where the installation has two
engines.
3 Use
Control lever
neutral
gearbox
ahead
gearbox
astern
throttle
astern
throttle
ahead
VD00665
vetus
VD00666
Name LED colour
Engine (*) Green
Warm/Sync Orange
Command Red
Engine (*) Green