Specifications

39
7 Starting
• How to start the engine and what to
check before, during and immediately
after starting is described on page 26
and further.
Allow the engine to test run for about 10
minutes at idling speed.
Check that the engine and all connec-
tions (fuel, coolant and exhaust) for
leaks.
Stop the engine immediately if it makes
any strange noises, vibrates exces-
sively or if black smoke comes out of
the exhaust!
8 Bleeding
The cooling system must be bled as soon
as the engine has reached normal working
temperature.
• Openthecapontheexpansiontank.
• Varytherevolutionsbetweenidlingand
2000 rev/min.
• Addcoolantifnecessary.
• Closethecapontheexpansiontank.
• Checkthecoolanttemperature.
9 Sea trial
Make sure that the control lever(s) is (are)
activated, see page 21.
Engage the gearbox or stern drive and
carry out a sea trial.
First commissioning
3 Use