Specifications
70
48 Replace drive belt
The expansion tank (1), the after cooler
(2) and the drive belt cover (3) have to
be removed before the drive belt can be
replaced.
Danger
Only check, tension or replace the drive
belt when the engine is stopped.
• Stop the engine, close the sea cock
and drain the system.
• Loosenthehoseclampsfortheexternal
water (IN and OUT) and take the hoses
(4) off the hose connection points.
• Drain the internal water system and
remove the hoses from the expansion
tank.
• Removetheexpansiontank(1).
• Loosen the bolts (5) and remove the
covers at the top and bottom of the
after cooler. Be careful with the red sili-
cone gaskets.
4 Maintenance
Replace drive belt
Every 800 operating hours.
2
3
1
VD01219
4
4
5
VD01220
VD00703