Specifications

6
1 Safety measures
Prevention of injury
• Themovingpartsoftheenginearedan-
gerous. Never touch moving parts of
the engine while it is running, to prevent
cuts and other injuries.
• Stop the engine before carrying out
maintenance!
• Alwaysstoptheenginebeforetopping
up or replacing fuel, oil or coolant.
• Before carrying out inspection or
maintenance, the ignition key must be
removed and the main battery switch
turned off.
• Satisfy yourself that everything is in
order before the engine is started
again!
Make sure that no-one is working on or
close to the engine before you start it.
Remove all foreign objects from around
the engine, such as litter, oil, tools and
other components that are not part of
the engine.
• Installallprotectivecovers!
To prevent injury, make sure that all
protective covers and cover plates are
replaced over moving parts.
• Removeanytoolusedtobartheengine.
If you leave this in position, serious
injury or damage to the equipment can
result.
• NEVERopenthecapoftheexpansion
tank when the engine is at working tem-
perature.
• Only check the level of the coolant
after the engine has been stopped and
the cap of the expansion tank is cool
enough to remove with bare hands.