Specifications

81
Inspections and maintenance work to be carried out: page
1 Check the zinc anodes. 82
2 Drain off the water from the fuel system and fill the fuel tank. 84
3 Make sure that the engine fuel system is filled with a fuel mixture with protective
properties.
85
4 Flush out the raw water circuit with fresh water and if necessary fill with anti-
freeze.
Clean the heat exchanger if necessary. 86
5 Make sure that the cooling system is filled with a suitable anti-freeze. 87
6 Change the oil filter and the engine oil. 88
7 Change the oil in the gearbox. 88
8 Grease moving parts of the engine, including the turbo. 89
9 Clean the engine, remove any salt. Paint any rust spots and spray the whole
engine with a protective medium, for example CRC protective 6-66.
90
10 Disconnect the battery cables, charge the batteries if necessary and grease the
battery terminals.
91
5 Winter storage procedure