Specifications

83
Check and replace the zinc anodes as
follows:
• Stoptheengine.
• Closetheseacock.
• Removethezincanodesfromtheheat\
exchanger housing and the after cooler
respectively.
• Replacethe(new)zincanodesandthe
copper rings.
Use a sealant, for example Loctite®
Thread Sealant with PTFE or LOXEAL®
18-10 Pipe Sealant.
• Open the sea cock, start the engine
and check for leaks.
5 Winter storage procedure
VD01196 VD01197