Specifications

89
VD01225
8 Greasing moving parts
For a good working of the engine it is
essential to grease a number of moving
parts on the outside of the engine or to
spray them with oil.
Turbocharger
The turbocharger is a variable geometry
type (VGT). The operating mechanism for
this is on the outside of the turbo. This
operating mechanism must be free of cor-
rosion and well greased if it is to work on
the best possible way.
5 Winter storage procedure
• Apply long-life water-resistant lithium-
based grease, for example ‘ZEP RED
LITHIUM GREASE’, to the operating
mechanism.
• Then spray the cast-iron housing and
the aluminium parts of the turbo with
liquid lubricant containing Teflon®, for
example ‘ZEP 2000.’
• Disconnect the hose connecting the
turbo to the after cooler from the turbo.
Remove any oil residue from the sur-
face of the turbo exhaust and then
replace the hose.
• Remove the air filter. Remove any oil
residue from the surface of the turbo
intake and then replace the hose.
• Clean the air filter if necessary, see
page 56.