Replacement Part List

ManualsBrandsVEVOR ManualsRecreational Vehicles6.6 x 8.2 ft. Car Side Awning with Carry Bag Telescoping Poles Trailer Sunshade Rooftop Tent Installation Kit, Sand

Car awning Parts list

1：rope*2

2：Tent nails*2

3：Mounting

brackets

4：Soft

protective sleeve

5: 10 nuts for B

and C part

connections

6: 15 screws for

A and D part

connections

7:Screws for

mounting brackets

8:Screws for

mounting round

crossbars and

outriggers

1:Screw tightening Connection B and C (this step does not require an awning smaller than 6 inches wide)

2:After connecting B and C, screw the screws with the 2 A's and clip the black bag between them

3:Screws tighten both A and D(Awnings that are less than 6 inches wide are not required for this step )

4:Thread both ends of the tarpaulin into the recesses of the assembled part A

5:Fix the assembled awning to the side of the car with screws and brackets

6:Open the round legs and struts and secure the rope and Tent nails,

If you buy an awning that is less than 6 inches wide, then there are only 2 A and 1 B accessories, and without C and D, we do not need the assembly work from the first step to the third step

Summary of content (1 pages)

PAGE 1
Car awning Parts list 1：rope*2 2：Tent nails*2 3：Mounting brackets 4：Soft protective sleeve 5: 10 nuts for B and C part connections 6: 15 screws for A and D part connections 7:Screws for mounting brackets 8:Screws for mounting round crossbars and outriggers If you buy an awning that is less than 6 inches wide, then there are only 2 A and 1 B accessories, and without C and D, we do not need the assembly work from the first step to the third step 1:Screw tightening Connection B and C (this step does not req