Content Product Receiving and Inspection Product Receiving and Inspection Thank you for choosing our company's fully automatic ice maker. In order to Product Model List viv ini ia eee 1 protect your legal rights, please pay attention to the following when receiving Explosion diagram of machine assembly. and inspecting the goods: Electric Safety . . . 3 1. Whether the outer packaging of the machine is in good condition; Installation and Placement of Machine Feet 2.
Explosion diagram of machine assemble) Electric Safety B® 1. The power connection should be applied to the it nameplate, the specified power supply should be used, a the label ee and the specifications of the wires used to connect the circuit should be determined to meet the requirements. The belle 1s a reliable 2. The machine must be reliably grounded.
Self-contained Machine Installation 1.The ice maker must use sanitary drinking water at room temperature. The water supply pressure should be controlled between 2,The ice maker relies on gravity to drain, so it is necessary to ensure that the drain pipe has sufficient slope and drop. 3.The supplied water filter is only suitable for machine testing. The filter is disposable and is replaced regularly according to local water quality. 4.The connector on the filter needs to be removed with a special tool.
Maintaining Please perform maintenance and maintenance according to the requirements of this manual in order to improve the reliability and service life of the ice maker, and avoid the increase in the energy consumption coefficient of ice production while maintaining hygiene. 1.Clean the environment around the ice machine frequently to keep it clean, and do not block the general blinds of the ice machine. 2.The shell can be cleaned with a neutral detergent, and then wiped with a soft cloth and water. 3.
LED Control Panel 1. =] mr Ra tal fn Oi [por] BEER [ron] S © [Power] can be used for short-term shutdown operation. [status] forced deicing button. Press this key during the ice making process (the ice making lamp is always on), and the program control can immediately change to the ice removal process. This function is often used for machine maintenance judgment.
Ice Making Working Process LCD Panel button Operation Water = ingress —> P balance 3] Pr-Colling] Ice main Pr eras y South perversion & potentiate oan fem] [Tn LCD Panel Running state = EI=] = oi aed ol $00 2 A053 ®° RE] AT BIENNIAL BEE) Water ingress Pressure balance Flushing program EEE] tid ®, .
LCD Panel Functions Operation A.Appointment tine OFF 1. Turn off the mushiness and will display characters as above. 2. Press bitten EA, the display will be showed in picture 2,default time is 2 hrs and sparkling, Press bitten A each time, the time will be lengthened by 18 minutes. Press bitten [7] each time, the time will be shorten by 10 minutes. The maximum reservation time is 12 hrs, 4. press button J, it enter into scheduled boot status,the screen will show the information of tine countdown. -12B.
General Precautions This appliance is suitable for the catering industry, such as kitchen areas in shops, offices or other workplaces; farms, hotels, motor hotels and residential environments, family hotel environments, catering and similar non-retail applications. Do not store hazardous chemicals such as organic solvents and sprays in the appliance. The machine installation failure must be replaced and repaired by the manufacturer or professionals.
Fault Code panel| Panel Fault Fault Possible Cause Solution 1. 5 Seconds before roper-on, the DE-icing plate will disengage fore 1. DE-icing plate is missing or misplaced; 1. Reset the ice revival plate; seconds} 2 ri magnetic induction 2. Replace the ice revival plate/full oe senors wm | X Tons | 2 The tor rol plate Ls ot reset within 48 sears at toe real; pidgin) = 31 Contact aft. alas serviceable trouble transcontinental te be oval plate has not been reset for tong then 4 minutes during 3.